![Atari RAMPAGE WORLD TOUR Operation Manual Download Page 2](http://html1.mh-extra.com/html/atari/rampage-world-tour/rampage-world-tour_operation-manual_2995960002.webp)
SAFETY NOTICES
The following safety instructions apply to all operators and service personnel. Specific warnings and
cautions will be found throughout this manual where they apply. We recommend that you read this page
before preparing your game for play.
C A U T I O N
HANDLING ELECTRONIC DEVICES:
This game uses complex electronic components that are
SENSITIVE to static electricity.
The following precautions must be observed and followed prior to
handling any of the electronics that make up this game.
1)
Discharge any static electricity build up in your body by touching the safety ground stud of the power
supply chassis. This must be done BEFORE touching or handling the electronic assemblies.
2)
Store the electronic assemblies in an anti-static area. Anti-static bags must be used to store the CPU
board assembly. Use the same bag to save the old CPU assembly after the new unit is installed.
DISCONNECT POWER DURING INSTALLATION OR REPAIRS. Always turn the power OFF and
unplug the game before attempting service or adjustments. Installing or repairing PC boards with power
ON can damage components and void the warranty. Be sure that all ground wires are installed securely.
PROPERLY GROUND THE GAME. To avoid electrical shocks, do not plug in the game until it has been
inspected and properly grounded. This game should only be plugged into a grounded 3-wire outlet. Do
not use a “cheater” plug or cut off the ground pin on the line cord.
USE PROPER FUSE. To avoid electrical shock, all replacement fuses must match the original fuse in
fuse type, voltage rating, and current rating.
POTENTIAL SHOCK HAZARD. This video game system does not utilize an isolation transformer. No
isolation exists between the internal cabinet A.C. system and the external A.C. line voltage.
PROPERLY ATTACH ALL CONNECTORS. Be sure that the connectors on each printed circuit board
(PCB) are properly connected. If they do not slip on easily, do not force them. A reversed connector may
damage your game and void the warranty. Connectors are keyed to fit specific pins on each board.
HANDLE FLUORESCENT TUBE AND
CRT WITH CARE.
If you drop a fluorescent tube or CRT and it
breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.
EPILEPSY WARNING
A very small portion of the population has a condition which may cause them to experience
epileptic seizures or have momentary loss of consciousness when viewing certain kinds of
flashing lights or patterns that are present in our daily environment. These persons may
experience seizures while watching some kinds of television pictures or playing certain video
games. People who have not had any previous seizures may nonetheless have an undetected
epileptic condition.
If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g.,
seizures or loss of awareness), immediately consult your physician before using any video games.
We recommend that parents observe their children while they play video games. If you or your
child experience the following symptoms: dizziness, altered vision, eye or muscle twitching,
involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE
IMMEDIATELY and consult your physician.
1-2
Summary of Contents for RAMPAGE WORLD TOUR
Page 41: ...CABINET WIRING DIAGRAM 3 4 ...