GAME CAN NOT BE PLAYED
1.
Game will not accept currency or tokens and cannot be started. Audio and video are present.
A:
B:
c :
Unlock and open the cash door. Empty the cash box.
Inspect the revenue for any counterfeit
currency. Check the vault and remove any items that block the path from the mechanism.
Unlock and open the coin door. Check each Acceptor by hand to ensure proper mounting.
Remove the mechanism and clear the currency path. Reinstall the mechanism and latch it.
Verify that the mechanism is level when the doors are closed. Repair or replace the coin door if it
is bent or damaged. Adjust the cabinet leg levelers if necessary to keep mechanisms vertical.
2.
Game accepts currency or tokens, but does not start. Audio and video are present.
A:
D:
E:
F:
Unlock and open the coin door. Check each Acceptor by hand to ensure proper mounting. Verify
that each of the release latches is in the closed and locked position. Test known good and bad
coins to see if the mechanism accepts and rejects the currency correctly.
Ensure that no loose parts or wires are caught in the hinges, latches, or switch contacts.
Inspect to see if the external Acceptor indicators (Pricing, Flashing Arrows, etc.) are illuminated.
Check connectors and cables for wiring continuity from CPU Board connectors to the Acceptors.
Enter the game Menu System by pressing and holding the BEGIN TEST switch inside the coin
door. From the DIAGNOSTIC TESTS menu, choose the SWITCH TEST (refer to Section One for
additional details). Use these tests to confirm the operation of each switch used in the game.
Check for continuity in each of the suspect switch connections (Common to Normally Open or
Common to Normally Closed). Replace faulty switches (bent levers, broken actuators, etc.).
Verify that each Acceptor is operating properly by placing it in a known good unit.
3.
Player controls are intermittant or completely non-functional. Game starts normally.
A:
B:
c :
Unlock and open the coin door.
Enter the game Menu System by pressing and holding the
BEGIN TEST switch inside the coin door. From the DIAGNOSTIC TESTS menu, choose the
SWITCH TEST (refer to Section One for additional details). Use these tests to confirm the
operation of each switch used in the game.
Reach through the coin door and unlatch the control panel. Grip the joysticks and carefully tilt the
panel back on its hinge. Ensure that no loose parts or wires are caught in the hinges, latches, or
switch contacts. Verify that the harness connectors are attached and fully seated.
Check that the cabinet wiring is correct for this game.
Ensure that the controls are properly
connected to the control input wires from
P12, and the
connector. Refer to the
Cabinet Wiring Diagram (Section Three) for specific wiring information.
Verify continuity in each of the switch connections (Common to Normally Open or Common to
Normally Closed). Ensure that the control is operating properly by placing in a known good unit.
Summary of Contents for RAMPAGE WORLD TOUR
Page 41: ...CABINET WIRING DIAGRAM 3 4 ...
