manualshive.com logo in svg

Atari RAMPAGE WORLD TOUR, Operation Manual

Share
Download
Atari RAMPAGE WORLD TOUR Operation Manual Download Page 15

DIP SWITCH TEST

The DIP Switch Test allows the operator to check the position of the two 

 DIP switches on the

CPU Board. The operator can also change the setting of any DIP Switch and see the results immediately.

To enter the test, use a joystick to select the DIP Switch Test and any control panel button to activate it.
The screen displays an illustration of each switch block and the current settings.

DIP Switches may be changed with the power on.

Set any switch, then check the screen to verify that the

new setting is now enabled. Country switch settings have no effect if CMOS Coinage Control is set to On.

Refer to the charts for assistance in choosing the desired switch positions   indicates factory defaults).
Press any control panel button to exit the DIP Switch Test.

DIP Switch 1

SW1 SW2 SW3 SW4 SW5 SW6 SW7

Coinage
Control
USA1

Gerl

CMOS
Frl

USA2
USA3

Ger3

USA4

Ger4

Fr4

U S A E C A  

 

N/U

N/U

N/U

N/U

N/U

N/U

Free Play Free Play Free Play
USA
French

German
Unused

1 Coin Counter

2 Coin Counters
Unused
Unused

Off’

On

Off’

Off’

Off’

Off

Off On

Off On Off

Off On On
On Off Off
On Off On
On On Off
On 

On 

On

Off’

Off’

Summary of Contents for RAMPAGE WORLD TOUR


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands