Getting started
Add and register handsets
Your telephone can have up to ten cordless handsets. You can add new
handsets (model SB67108, sold separately) to the SB67118 at any time, but
each new handset must be registered with the telephone base before use.
Each handset must be registered separately.
The handset provided with your SB67118 is automatically registered as
handset 1. Additional handsets will be assigned numbers in the order
they are registered (handset 2 to 10). You can register a maximum of ten
handsets.
Handsets purchased separately need to be registered to the telephone base
before use. When first purchased, all optional accessory
handsets will show
Place handset in cradle and press INT
on base for 4 seconds to register handset
on the screen.
You might need to charge the new handsets a minimum of
five minutes before registering to the telephone base (see
Battery installation and charging
in the SB67108 cordless
handset manual).
To register a handset to your telephone base
1. Place the unregistered handset into the charger cradle.
2. On the telephone base, press and hold
INT
button for about four seconds
(until the red light below the button turns on) and
then release the button. The screen of the telephone
base shows
Handset registering
and it takes about
10
seconds to complete the registration. The handset shows
Handset registered
and beeps when the registration is
successful.
-OR-
1. Place the unregistered handset into the charger cradle.
2. On the telephone base, press
MENU
/ENTER
, then scroll
down to
Registration
.
3. Press
MENU/
ENTER
again to browse the selections, scroll
to
HS registration
.
4. Press
MENU/
ENTER
. The screen of the telephone base
shows
Handset registering
and it takes about 10 sec-
onds to complete the registration. The handset shows
Handset registered
and beeps when the registration is
successful.
Red light
COVM
Speed dial setup
Customer support
Registration
>
HS registration
Cordless headset
Deregistration
>
Handset
registering
Handset
registered
Place handset in
cradle and press
INT on base for
4 seconds to
register handset
10
