background image

17

Getting started

Telephone base setup

Ring group

You can specify which extensions receive incoming calls. By default, all 
extensions and the telephone base receive incoming calls. You can block 
some extensions from receiving calls, however, they can still be used to place 
outgoing calls. 

When the telephone is idle, press 

MENU

/ENTER

.

Press 

 or   to scroll to 

Ringer setting

.

Press 

MENU/

ENTER

.

Press 

 or   to scroll to 

Ring group

. Press 

MENU/

ENTER

.

Press   or   to select the desired line 

( L1, L2, L3, L4 )

 while 

Ring group 

flashes.

Press 

 or  , then press the extension number on the 

dial pad 

(*,1,2,3,4,5,6,7,8,9,0)

that you want to delete 

from the ring group, or press the number again to add it 
up to the group. 

Press 

MENU/

ENTER

 to save the setting and return to 

the previous menu. There is a confirmation tone. To exit 
without making changes, press 

EXIT

.

                                                                                                           

NOTE:

*

 stands for the telephone base; 

0

 stands for extension 10. 

1.

2.

3.

4.

5.

6.

Directory
Call log
Ringer setting
Mailbox setup

>

Ringer volume
Ringer tone
Ringer group

>

Ring group:   L3

Extension number:

*1-3-56-8-0
Enter=Save

Ring group:

   L3

Extension number:
*1234567890
<>

LCD contrast

You can adjust the screen contrast to one of six levels to optimize readability 
in different lighting conditions.

When the telephone is idle, press 

MENU

/ENTER

.

Press 

 or   to scroll to 

Base setup

. Press 

MENU/

ENTER

.

Press 

MENU/

ENTER

again to select 

LCD contrast

.

Press 

 or 

 to scroll to the screen contrast level. The 

screen display temporarily fades away as you press 
and reappears as you press  .

Press 

MENU/

ENTER

 to save the setting and return to 

the previous menu. There is a confirmation tone. To exit 
without making changes, press 

EXIT

.

1.

2.

3.

4.

5.

Call log
Ringer setting
Mailbox setup
Base setup

>

LCD contrast
Key tone
Language
Line selection

>

LCD contrast

LOW        H

Enter=Save

Summary of Contents for SynJ SB67118































































































Reviews: