AT&T OneVision DEFINITY G3 Fault Management and integration User Manual Download

Page: 78 / 153

Individual External Devices

Issue 2 April 1996

4-35

Menu Bar for Individual External Device

Double click on the following icon for information about the menu commands for
the Individual External Device screen:

Data Area for Individual External Device

The Individual External Devices screen has the following data areas:

■

Screen heading

■

Alarms

■

Configuration data

Double click on an icon for more information:

Table 4-23.

Menu Commands

Menu

Command

Description

Options

Closes this view and any
open child windows.

Fault

Display Alarms For External
Device <name>

Displays all active alarms for
the device.

Display Errors For External
Device <name>

Displays all active errors for
the device.

Help

Displays a Help window.

Table 4-24.

Screen Heading

Data

Description

Application
Name

DEFINITY G3 Fault Management

External
Device Name

The name of the external device.

Switch Name

The name of the PBX as it appears on the NMS when the
PBX is administered as a node on the network.

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands