AT&T CRL32102, Complete User'S Manual

Page: 25 / 91

19
Telephone settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps to turn the CID time
sync
feature on or off. The default setting is
On
.
1. When the handset is in idle mode, press
MENU/
SELECT
to enter the main menu.
2. Use
q
CID
or
p
DIR
to scroll to >Settings , then press
MENU
/SELECT .
3. Use q
CID
or p
DIR
to scroll to >CID time sync , then
press
MENU
/SELECT .
4. Use q
CID
or p
DIR
to highlight >On or >Off , then press
MENU
/SELECT
to save. There is a confirmation tone and
the screen returns to the previous menu.
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID log only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Settings , then press
MENU
/SELECT
.
3. Use q
CID
or p
DIR
to scroll to >Home area code , then
press
MENU
/SELECT . The screen briefly shows
Only for 7digit dial from CID .
4. Use the dialing keys to enter a three-digit home
area code.
Press
MUTE
/DELETE to delete a digit.
Press and hold
MUTE
/DELETE
to delete all digits.
5. Press
MENU
/SELECT to save. There is a confirmation
tone and the screen shows Area code will not show in
CID briefly before returning to the previous menu.
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code to dial out locally from the caller ID log. With the home area code displayed,
press and hold
MUTE
/DELETE until the digits are deleted, and then press
MENU
/SELECT .
The home area code is now restored to its default setting of _ _ _ (empty).
•
•
Handset settings
Key tone
>CID time sync
CID TIME SYNC
>On
CID time sync
>Home area code
HOME AREA CODE
___