6
Getting started
Wall mount to tabletop installation
1. Unplug the telephone line cord from the wall jack (or DSL filter). If the
telephone line cord is bundled, untie it first. Push the telephone base up to
remove it from wall.
2. Put the corded handset aside. Hold down the switch hook on the telephone
base, and then slide the handset tab upwards to remove it from the slot.
Rotate the handset tab by 180 degrees. Then, replace the handset tab into the
slot until it locks into position.
3. Gently pull upward to release the wall mount bracket. Rotate the wall mount
bracket up to tabletop position and push it into the telephone base until it
clicks into place.
4. Plug the telephone line cord (or DSL filter) into the wall jack. Bundle the telephone
line cord neatly with the twist tie if necessary.
Installation options
1
2
3
4
