Answering system
Answering system settings
Message alert tone
When the message alert tone is set to
On
, and there is at least one new
message, the telephone base beeps every ten seconds.
Unless you change it,
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press
MENU/
�ELECT
to enter the main menu.
2. Press
q
CID
or
p
DIR
to scroll to
Answering sys
, then
press
MENU
/�ELECT
.
3. Press
q
CID
or
p
DIR
to scroll to
Ans sys setup
, then
press
MENU
/�ELECT
.
4. Press
q
CID
or
p
DIR
to scroll to
Msg alert tone
, then
press
MENU
/�ELECT
.
5. Press
q
CID
or
p
DIR
to choose
On
or
Off
.
6. Press
MENU
/�ELECT
to save the setting. You hear a
confirmation tone.
NOTES:
The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
To temporarily turn off the message alert tone, see page 87.
•
•
MSG ALERT TONE
>On
Remote code
>
Msg alert tone
MSG ALERT TONE
>On
p
q
Remote code
>
Msg alert tone
p
q
82
