Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single
handset. When the telephone base is not in use:
If you have one handset, press and hold
�TT
.
If you have more than one handset:
w
Press
�TT,
then use the dialing keys to enter the
destination handset number.
-OR-
w
Press
q
CID
or
p
DIR
to highlight the destination
handset number, then press
MENU
/�ELECT
or
�TT
.
The telephone base shows
Connecting to HAND�ET X...
(
HAND�ET
represents the handset name,
X
represents
the destination handset number) for a few seconds. When the connection is
made, both the telephone base and destination handset display
�ress and
hold [�TT] to talk
.
2. Press and hold
�TT
. A chirp indicates your microphone
is on. Speak towards the telephone base. Your voice is
broadcast to the destination handset.
While you are speaking, the telephone base shows
�TT To handset: X
.
3. Release
�TT
after speaking. Both devices beep once again and the screens
show
�ress and hold [�TT] to talk
, then you can press and hold
�TT
to
continue speaking or the destination device can respond (see
Answer a
�TT call
on page 55).
4. To end the PTT call, press
CANCEL
. The telephone base shows
�ush to talk Ended
for a few seconds.
•
•
PTT To
handset: X
PUSH TO TALK
>Handset X
p
q
Connecting to
Handset X...
Press and hold
[PTT] to talk
52
