Multiple handset use
Push-to-talk (PTT)
�TT call to a single device
Using a cordless handset:
1. There are a few ways to begin a PTT call to a single device.
When the handset is not in use:
If you have one handset, press and hold
�U�H TO TAL�
.
If you have more than one handset:
w
Press
�U�H TO TAL�
on the handset, then use the
dialing keys to enter the destination device number.
-OR-
w
Press
�U�H TO TAL�
on the handset. Press
q
CID
or
p
DIR
to highlight the destination device number, then
press
MENU
/�ELECT
or
�U�H TO TAL�
.
The handset shows
Connecting to HAND�ET X...
(
HAND�ET
represents the handset name,
X
represents the
destination handset number) or
Connecting to BA�E 0...
(
BA�E
represents
the base name)
for a few seconds. When
the connection is made, both your and the destination
device screens display
�ress and hold [�TT] to talk
.
2. Press and hold
�U�H TO TAL�
. A chirp indicates your
microphone is on. Speak towards the device. Your voice is
broadcast to the destination device.
While you are speaking, your handset shows
�TT To handset: X
or
�TT To base
.
3. Release
�U�H TO TAL�
after speaking. Both devices beep once again and
the screens show
�ress and hold [�TT] to talk
, then you can
press and hold
�U�H TO TAL�
to continue speaking or the destination
device can respond (see
Answer a �TT call
on page 55).
4. To end the PTT call, press
OFF/
CANCEL
or place the handset in the
telephone base or charger. The handset shows
�ush to talk ended
.
•
•
PTT To
handset: X
PUSH TO TALK
>Handset X
Connecting to
Handset X...
Press and hold
[PTT] to talk
51
