manualshive.com logo in svg

AT&T CL4939, User Manual

Share
Download
AT&T CL4939 User Manual Download Page 54

48

Answering system operation

Recording and playing memo

Memos are messages you record yourself. They 
are saved, played back and deleted exactly like 
incoming messages. You can record a memo as 
a reminder to yourself, or leave a message for 
someone else using the same telephone.

To record a memo

Use the following steps to record a memo.

Press 

REPEAT

/MEMO

. The screen shows 

USE 

STOP TO END 

with a long beep.

Speak towards the microphone (

MIC

) on the 

telephone and maintain a distance of about 
nine inches. The elapsed time (in seconds, 
0-59) appears on the message window while 
recording. You can record a memo up to three 
minutes. Memos shorter than one second are 
not recorded.
Press 

PLAY

/STOP

 

to stop recording. The 

telephone beeps to confirm the recording has 
finished.

NOTE: 

If the answering system memory is full, 

when you press 

REPEAT

/MEMO

 in step 1, the 

answering system announces, “

Memory is full.

” The 

telephone automatically returns to idle mode.

To play back memos

Memos are stored as messages. See 

Message 

playback

 on page 46 for instructions on playback 

and deletion.

1.

2.

3.

12:00

AM

11-20 0

16 CALLS  5 NEW

 

Summary of Contents for CL4939













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands