manualshive.com logo in svg

AT&T CL4939, User Manual

Share
Download
AT&T CL4939 User Manual Download Page 12

6

Getting started

Display screen messages

Screen messages

DELETED

All the entries stored in call history have 
been deleted. 

-OR-

 

The directory or two-touch memory entry 
has been deleted.

DIRECTORY EMPTY

There are no telephone numbers stored in 
the directory.

CALL LOG EMPTY

There are no entries in the call history.

END OF LIST

You have reached the end of the call 
history records.

LINE IN USE

Another telephone on the same line is in 
use. 

-OR-

 

No telephone line cord is connected to 
the telephone.

RINGING

There is an incoming call.

NO AC POWER

There is no AC power. Check the power 
adapter connection to the telephone and 
the electrical wall outlet.

MEMORY FULL

The directory is full.

ONLY 15 ALLOWED The name you entered in the directory is 

over 15 characters. 

ONLY 24 ALLOWED The number you entered in the directory 

or two-touch memory is over 24 digits.

SET CLOCK

The clock needs to be set.

STORED

The entry is saved in the directory or  
two-touch memory location successfully.

XX CALLS YY NEW

There are XX calls in the call history 
and YY of them are new (missed and 
unreviewed).

Summary of Contents for CL4939













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands