CHAPTER 4: PC APPLICATIONS
DEFINITY Communications System
7400B Plus Data Module
Page 4-48
User´s Guide
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Disconnecting a Call
1
To terminate the call, press
"F5" and the appropriate letter for
the disconnect macro.
2
Press
"F1" to return to the Main menu.
3
Select
"0" (End Communication/Program) at the Enter Selection
prompt.
4
Select
"H" to hang up, Smartcom II will reset automatically.
5
To place another call, repeat the steps in the "Placing a Call"
section or select
"0" and press "E" to exit Smartcom II.
ffffffffffffffffffffffffffffffffffffffffffff
PC to PC Calls
On PC to PC calls, the call originator and the call receiver should
refer to the sections for "Configuring the Direct Mode," "Setting
the Call Parameters," "Building a Macro," and "Placing a Call".
In addition to this, the call receiver should use the guidelines
below to set the PC to answer calls automatically.
1
Edit the Automatic Log-on macro by replacing the
atdt<phone#> entry with ats0=1.
2
At the Main Menu, select
O to Originate a call.
