ATAGO NAR-2T Instruction Manual Download Page 4

Page: 4 / 55

Handling of this instrument

WARNING

CAUTION

When measuring a substance harmful to

the human body, be well aware of its

properties and put on protective gloves,

mask, etc.

If the instrument begins to smell

abnormally, overheat, or emit smoke, turn

off the power switch and disconnect the

power plug immediately.

Fire or malfunction may result if the

instrument is continued to be used.

Ask your ATAGO distributor for an inspection.

Do not attempt to repair, modify, or

disassemble the instrument yourself.

Improper servicing may result in fire,

electrical shock, or burns.

If the instrument is dropped or is subjected

to a strong shock, have it inspected by an

ATAGO distributor.

Fire or malfunction may result if the

instrument is used.

Do not apply water or sample over any part

other than the surface of the prism.

Application on any other par t of the

instrument may result in a malfunction.

If this instrument is used to measure very

hot or highly acidic sample, the prism may

be damaged resulting in inaccurate

measurements.

1. Precautions for use

Summary of Contents for NAR-2T
























































Search results

Summary of Contents for NAR-2T

Reviews:

Brands by name

Popular brands

ATAGO NAR-2T, Instruction Manual

Search results

Summary of Contents for NAR-2T

Reviews:

Brands by name

Popular brands