Fig. 4-4
The light intensity can be selected from
eight levels, and also the light intensity of
the scale view can be selected from three
levels with these switches (UP and DOWN).
a) Illumination selector switch
b) Main power switch
(2) Digital thermometer (Figs. 4-4 and 4-5)
a)
12
Υ
UP
DOWN
UP
DOWN
(3)-1. How to select the light intensity (from eight levels)
Digital thermometer displays the level of the light intensity (0 to 7) by pressing UP or
DOWN switch when the digital thermometer displays the current temperature.
*0 means the light is off.
a)
Illumination selector switch
ە
About error messages
ە
4. Names and Functions of main parts
Turn this switch ON and the refractometer
and the digital thermometer are turned on.
Fig. 4-5
c) Main power connector port
Plug the AC power cable into this
connector port.
d) Thermo-sensor cable connector port
Plug the thermo-sensor cable connector
of the Abbe Refractometer into this
connector port.
e) Lamp cable connector port
Plug the lamp cable connector of the
Abbe Refractometer into this connector
port.
(3) How to use Illuminator Selector Switch
Press UP to get more intensity of the light, and press DOWN to
get less intensity of the light.
b)
After selecting the level of the light intensity, the digital
thermometer displays the current temperature in 5 seconds
Also, the digital thermometer displays the current temperature
when the switchs are not operated for 5 seconds.
c)
(3)-2. How to select the light intensity of the scale view (from three levels)
Press UP and DOWN switchs together when the digital thermometer displays the
current temperature. The digital thermometer displays the level of the scale light
intensity (C0 to C2).
a)
By pressing UP or DOWN, the display changes to C0, C1 or C2, and the scale light
intensity changes. *C0 means the scale light is off.
b)
After selecting the level of the scale view light intensity, the digital thermometer
displays the current temperature in 5 seconds. Also the digital thermometer displays
the current temperature when the switches are not operated for 5 seconds.
c)
The unit displays error messages when there is some problems or the unit is operated wrong.
ࠕ
EEE
ࠖ͐
is displayed when the temperature sensor cable is not connected, or the unit
does not work properly.
ࠕ
LLL
ࠖ͐
is displayed when the temperature gets below 0
Υ
b)
c)
d)
e)
When you can not specify the problem with the information above, please contact your
ATAGO distributor.
