Asus ZENPAD, E-Manual

Page: 121 / 126

Appendix
121
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general
public to electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientific organizations
through regular and thorough evaluations of scientific studies. The unit of measurement for the
European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR),
and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of
the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines
and the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a
separation of 1.5 cm to the body while transmitting at the highest certified output power level in all
frequency bands of the mobile device.
A minimum separation distance of 1.5 cm must be maintained between the user’s body and
the device, including the antenna during body-worn operation to comply with the RF exposure
requirements in Europe.
This ASUS product complies with IMDA Standards.
Complies with
IMDA Standards
DB103778
Regional notice for Singapore
For Model DK01 (Optional)
CE Mark Warning
The shipped version of this device complies with the requirements of the EMC directives 2014/30/
EU “Electromagnetic compatibility” and 2014/35/EU “Low voltage directive”.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved
power cords greater than or equal to: H05VV-F, 3G, 0.75 mm
2
or H05VV-F, 2G, 0.75 mm
2
.
For use with UL Listed I.T.E., ASUS Tablets series only.