Asus ZENPAD, E-Manual

Page: 17 / 126

Chapter 1: Get your Zen ready!
17
Charging your ASUS Tablet
Your ASUS Tablet comes partially charged but you must charge it fully before using it for the first
time. Read the following important notices and cautions before charging your device.
IMPORTANT!
• Use only the bundled AC power adapter and USB cable to charge your ASUS Tablet. Using a different
AC power adapter and cable may damage your device.
• Peel off the protective film on the AC power adapter and USB cable before using it with your device.
• Ensure to plug the AC power adapter to a compatible power outlet. You can plug the AC power
adapter to any compatible 100~240V outlet.
• The output voltage of the AC power adapter for this device is DC 5.2V, 1A.
• When using your ASUS Tablet while plugged-in to a power outlet, the power outlet must be near
your device and easily accessible.
• Do not use or expose your ASUS Tablet near liquids, rain, or moisture.
• Do not use your ASUS Tablet near heating equipment or in places where there is likelihood of high
temperature.
• Keep your ASUS Tablet away from sharp objects.
• Do not place objects on top of your ASUS Tablet.
CAUTION!
• While charging, your ASUS Tablet can become warm. This is normal, however, if your device becomes
unusually hot, disconnect the USB cable from your device and send the device, including the AC
power adapter and cable to an ASUS-qualified service personnel.
• To prevent any damage to your ASUS Tablet, AC adapter, or USB cable, ensure that the USB cable, AC
adapter, and your device are connected properly before charging.
3. Put back the memory card slot cover.