Asus (WL-330) User Manual Download | Manualshive

Page: 73 / 74

background image

5-5

ASUS Pocket Wireless Access Point (WL-330)

Troubleshooting

Problem

Action

The default subnet of the ASUS
Pocket Wireless AP is
“192.168.1.1”.

In special cases, when the ASUS
Pocket Wireless AP joins an AP
network with the same IP address,
reset the ASUS Pocket Wireless AP
to access the web configuration
page.

Where can I get a firmware file to
upgrade the ASUS Pocket
Wireless AP?

You may download the latest
firmware file from the ASUS
website (www.asus.com).

Use the Firmware Upgrade page in
the configuration utility to update
the ASUS Pocket Wireless AP
firmware.

The ASUS Pocket Wireless AP
Power LED continuously blinks
for more than a minute.

Turn off the ASUS Pocket Wireless
AP. Turn the device again and
observe if the Power LED stops
blinking.

If the blinking stops, you may have
pressed the reset button when you
previously turned on the device.

If the blinking continues, you need
to restore the ASUS Pocket
Wireless AP firmware. Use the
Firmware Restoration utility to
restore or update the ASUS Pocket
Wireless AP firmware.

«
...
71
72
73
74
»

Summary of Contents for (WL-330)











































































Reviews:

No comments

Related manuals for (WL-330)

Brand: Qixiang Technology Pages: 11

Brand: Icom Pages: 2

Brand: Quantum Pages: 8

Brand: Quantum Pages: 21

Brand: Quantum Networks Pages: 27

DAP-2553 - Wireless N Dual Band Gigabit Access...

Brand: D-Link Pages: 32

Brand: SIYI Pages: 95

Brand: Konig Pages: 2

UniFi AP AC Outdoor

Brand: Ubiquiti Pages: 26

Brand: TERABEAM Pages: 10

Aruba 318 Series

Brand: Hewlett Packard Enterprise Pages: 2

Brand: Fortinet Pages: 24

ANGLOPACK Comtrend CT-6382T

Brand: Teleconnect Pages: 6

Brand: BT Pages: 4

Brand: Comtrend Corporation Pages: 102

Brand: Comtrend Corporation Pages: 109

Brand: Comtrend Corporation Pages: 158

Brand: Allnet Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands