Asus Vintage V2-AH2 Manual Download Page 22

Page: 22 / 103

2-6

Chapter 2: Basic installation

2.4.3 Installing the CPU fan and heatsink assembly

The AMD Athlon™ 64FX/64 or Sempron™ processor requires a specially

designed CPU fan and heatsink assembly to ensure optimum thermal

condition and performance.

• Your boxed CPU heatsink and fan assembly should come with

installation instructions for the CPU, heatsink, and the retention

mechanism. If the instructions in this section do not match the CPU

documentation, follow the latter.

• The retention module base is already installed on the motherboard.

You do not have to remove the retention module base when

installing the CPU or installing other motherboard components.

• If you purchased a separate CPU fan and heatsink assembly, make

sure that a thermal interface material is properly applied to the CPU

surface or the heatsink bottom before you install the CPU fan and

heatsink assembly.

Retention Module Base

CPU Heatsink

CPU Fan

Retention bracket lock

Retention bracket

Summary of Contents for Vintage V2-AH2








































































































Search results

Summary of Contents for Vintage V2-AH2

Reviews:

Related manuals for Vintage V2-AH2

Brands by name

Popular brands

Asus Vintage V2-AH2, Manual

Search results

Summary of Contents for Vintage V2-AH2

Reviews:

Related manuals for Vintage V2-AH2

Brands by name

Popular brands