Asus V Series User Manual Download Page 44

Page: 44 / 100

3-4

Chapter 3: Starting up

3.3.2 Drivers menu

The drivers menu shows the available device drivers if the system detects

installed devices. Install the necessary drivers to activate the devices.

ASUS InstAll-Drivers Installation Wizard

Installs the ASUS InstAll-Drivers Installation Wizard.

Intel Chipset Inf Update Program

Installs the Intel

chipset Inf update program.

Intel Graphics Accelerator Driver

Installs the Intel Graphics Accelerator driver.

SoundMAX ADI1988A Audio Driver

Installs the SoundMAX

ADI1988A audio driver and application.

JMicron JMB36X RAID Controller Driver

Installs the JMicron

JMB36X Serial ATA RAID controller driver.

Realtek RTL 8111b Ethernet Driver

Installs the Realtek RTL 8111b Ethernet driver and application.

USB 2.0 Driver

Installs the USB 2.0 Driver.

Summary of Contents for V Series





































































































Search results

Summary of Contents for V Series

Reviews:

Related manuals for V Series

Brands by name

Popular brands

Asus V Series, User Manual

Search results

Summary of Contents for V Series

Reviews:

Related manuals for V Series

Brands by name

Popular brands