Asus V Series User Manual Download Page 48

Page: 48 / 100

3-8

Chapter 3: Starting up

3.4

Software information

Most of the applications in the support CD have wizards that will

conveniently guide you through the installation. View the online help or

readme file that came with the software for more information.

3.4.1 SoundMAX

High Definition Audio utility

The ADI AD1988A High Definition Audio CODEC provides 8-channel

audio capability through the SoundMAX® audio utility with AudioESP™

software to deliver the ultimate audio experience on your PC. The software

implements high quality audio synthesis/rendering, 3D sound positioning,

and advanced voice-input technologies.

Follow the installation wizard to install the ADI AD1988A Audio Driver from

the support CD that came with the motherboard package to activate the

SoundMAX® audio utility.

• You must use 4-channel, 6-channel or 8-channel speakers for this

setup.

• SoundMAX

requires Microsoft

Windows

2000/XP or later

version. Make sure that one of these operating systems is installed

before installing SoundMAX

• Jack Retasking function works on High Definition front panel audio

ports only.

If the SoundMAX

audio utility is correctly installed,

you will find the SoundMAX

icon on the taskbar.

From the taskbar, double-click on the SoundMAX

icon to display the

SoundMAX

Control Panel.

Summary of Contents for V Series





































































































Search results

Summary of Contents for V Series

Reviews:

Related manuals for V Series

Brands by name

Popular brands

Asus V Series, User Manual

Search results

Summary of Contents for V Series

Reviews:

Related manuals for V Series

Brands by name

Popular brands