Asus T-P5G43 User Manual Download Page 81

Page: 81 / 104

5-19

ASUS T-P5G43

CPU Ratio Setting [Auto]

Allows you to adjust the ratio between the CPU Core Clock and the FSB

Frequency. Configuration options: [Auto]

C1E Support [Enabled]

Allows you to enable or disable Inter CPU Enhanced Halt (C1E) function, a CPU power-

saving function in system halt state. When enable, the CPU core frequency and voltage will

be reduced during the system halt state to decrease power consumption.

Configuration options: [Disabled] [Enabled]

If you need to adjust the ratio manually, key in the number directly.

Intel (R) SpeedStep (TM)

tech. [Enabled]

Allows you to use the Enhanced Intel

SpeedStep

Technology. When set to

[Enabled], you can adjust the system power settings in the operating system to

use the EIST feature. Set this item to [Disabled] if you

do not want to use the EIST.

Configuration options: [Enabled] [Disabled]

The following item appears only when you installed an Intel

Pentium

4 or later

CPU that supports the Enhanced Intel SpeedStep

Technology (EIST).

CPU TM Function [Enabled]

Enables or disables Intel

CPU Thermal Monitor (TM) function, a CPU overheating

protection function. When enabled, the CPU core frequency and voltage are

reduced when the CPU overheats. Configuration options: [Disabled] [Enabled]

Execute Disable Bit [Enabled]

Enables or disables Intel

Execute Disable Bit function. This function enhance

protection of your computer, reducing exposure to viruses and malicious

buffer overflow attacks when working with its supporting software and system.

Configuration options: [Disabled] [Enabled]

Summary of Contents for T-P5G43









































































































Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands

Asus T-P5G43, User Manual

Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands