4-3
ASUS T-P5G43
4.3
Jumpers
1. Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system setup
parameters by erasing the CMOS RTC RAM data. The onboard button
cell battery powers the RAM data in CMOS, which include system setup
information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on
pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper
default position. Removing the cap will cause system boot failure!
P5Q18L
P5Q18L Clear RTC RAM
1 2
2 3
Normal
(Default)
Clear RTC
CLRTC
Summary of Contents for T-P5G43
Page 20: ...1 10 Chapter 1 System introduction ...
Page 54: ...3 16 Chapter 3 Starting up ...
Page 98: ...5 36 Chapter 5 BIOS setup ...