Asus T-P5G43 User Manual Download Page 16

Page: 16 / 104

1-6

Chapter 1: System introduction

1.3

Rear panel

The system rear panel includes the power connector and several I/O ports that

allow convenient connection of devices.

12.

Expansion slot covers.

Remove these covers when installing expansion

cards.

13.

Expansion slots.

Use this slot when installing expansion card.

14.

Rear speaker Out port (black).

This port connects the rear speakers on a

4-channel, 6-channel, or 8-channel audio configuration.

15.

Side Speaker Out port (gray).

This port connects the side speakers in an

8-channel audio configuration.

16.

Microphone port (pink).

This Microphone port connects a microphone.

17. Coaxial S/PDIF Out port.

This port connects an external audio output device

via a coaxial S/PIF cable

18. HDMI port.

This port is for a High-Definition Multimedia Interface (HDMI)

connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray

and other protected content.

19. Video Graphics Adapter (VGA) port.

This 15-pin port is for a VGA monitor

or other VGA-compatible devices.

20.

PS/2 mouse port (green).

This green 6-pin connector is for a PS/2 mouse.

21.

PS/2 keyboard port (purple).

This purple 6-pin connector is for a PS/2

keyboard.

13
14
15
16
17

20
21
22
23

27
28

30
31

T3-P5G43/T4-P5G43

18
19

Summary of Contents for T-P5G43









































































































Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands

Asus T-P5G43, User Manual

Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands