Asus S82A User Manual Download Page 80 | Manualshive

Page: 80 / 92

background image

80

5. Configuring the BIOS

Load Setup Defaults

This option allows you to load the default values for each of the parameters on the Setup menus. When
this option is selected or if [F9] is pressed, a confirmation is requested. Select Yes to load default values
programmed into the BIOS file (the default values may change from one BIOS version to another). You
can now select Exit Saving Changes or make other changes before saving the values to the EEPROM.

Discard Changes

This option allows you to discard the selections you made and restore the values you previously saved.
After selecting this option, all selections are updated and a confirmation is requested. Select Yes to
discard any changes and load the previously saved values.

Save Changes

This option saves your selections without exiting the Setup program. You can then return to other
menus and make changes. After selecting this option, all selections are saved and a confirmation is
requested. Select Yes to save any changes to the EEPROM.

«
...
78
79
80
81
82
...
»

Summary of Contents for S82A





























































































Reviews:

No comments

Related manuals for S82A

VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION

Brand: NEC Pages: 82

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 112

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 192

Toughbook CF-T7BWATAAM

Brand: Panasonic Pages: 44

Toughbook CF-F8EWDZZAM

Brand: Panasonic Pages: 20

Toughbook CF-19CHBAXBM

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 40

The Toughbook 52

Brand: Panasonic Pages: 2

TravelMate 240 series

Brand: Acer Pages: 96

Brand: Compaq Pages: 134

Brand: Toshiba Pages: 10

Brand: Dell Pages: 88

5110 Color Laser

Brand: Dell Pages: 90

Brand: Dell Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands