4
The ADSL Modem “Link” light is ON (steady and not
blinking) and means Internet access is possible, but I still
cannot browse the Internet.
• Restart your computer.
• Check if the WAN LED on the wireless router is on.
• Check the wireless encryption settings.
• Check if the computer can get an IP address (using both a
wired or wireless connection).
• Check that your web browser is configured to use the local
LAN and is not configured to use a proxy server.
If the ADSL “LINK” light blinks continuously or stays off,
Internet access is not possible - the Router is unable to
establish a connection with the ADSL network.
• Ensure that all your cables are properly connected .
• Disconnect the power cord from the ADSL or cable modem,
wait a few minutes, then reconnect the cord.
• If the ADSL light continues to blink or stays OFF, contact
your Internet Service Provider.
You forgot the SSID (network name) or encryption keys.
• Set up a wired connection and reconfigure the wireless
security settings.
• Press the Reset button at the rear panel of the wireless
router for more than five seconds.
Summary of Contents for RT-N10 - Wireless Router - 802.11b/g/n
Page 1: ...RT N10 Wireless Router User Guide ...
Page 70: ...70 ...
