Asus RS720-E8-RS24-ECP User Manual Download Page 69

Page: 69 / 192

ASUS RS720-E8-RS24-ECP

4-17

14. Auxiliary panel connector (20-2 pin AUX_PANEL1)

This connector is for additional front panel features including front panel SMB, locator

LED and switch, and LAN LEDs.

1. Front panel SMB (10-2 pin FPSMB)

These connectors are for the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1_LINKACTLED, LAN2_LINKACTLED)

These connectors are for Gigabit LAN activity LEDs on the front panel.

3. Locator LED (2-pin LOCATORLED1, LOCATORLED2)

These connectors are for the locator LED1 and LED2 on the front panel. Connect

the Locator LED cables to these 2-pin connector. The LEDs will light up when the

Locator button is pressed.

4. Locator Button/Switch (2-pin LOCATORBTN#)

These connectors are for the locator button on the front panel. This button queries

the state of the system locator.

Summary of Contents for RS720-E8-RS24-ECP

































































































































































































Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands

Asus RS720-E8-RS24-ECP, User Manual

Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands