Asus RS720-E8-RS24-ECP User Manual Download Page 175

Page: 175 / 192

ASUS RS720-E8-RS24-ECP

7-13

7.2

Management applications and utilities installation

When you place the support DVD into the optical drive, the DVD automatically displays the

main screen if Autorun is enabled in your computer. By default, the Drivers tab is displayed.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

•

The contents of the support DVD are subject to change at any time without notice. Visit

the ASUS website (www.asus.com) for the latest updates on software and utilities.

•

The support DVD is supported on Windows

Server 2008 R2 and Windows

Server

2012.

The support DVD that is bundled with your motherboard contains drivers, management

applications, and utilities that you can install to maximize the features of your motherboard.

The main screen of the Support DVD contains the following tabs:

1. Drivers

Utilities

3. MakeDisk

4. Manual

5. Contact

The main screen of the Support DVD looks exactly the same on the Windows

Server 2008

R2 and on the Windows

Server 2012 Operating System (OS).

7.3

Running the Support DVD

Summary of Contents for RS720-E8-RS24-ECP

































































































































































































Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands

Asus RS720-E8-RS24-ECP, User Manual

Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands