Chapter 2: Hardware Information
2-12
2.4.4
Removing a DIMM
1.
Press the retaining clips outward to
unlock the DIMM.
2.
Remove the DIMM from the socket.
2.4.3
Installing a DIMM
3.
Hold the DIMM by both of its ends
and insert the DIMM vertically into
the socket. Apply force to both ends
of the DIMM simultaneously until the
retaining clips snaps back into place.
Ensure that the DIMM is sitting firmly
on the DIMM slot.
1.
Unlock a DIMM socket by pressing
the retaining clips outward.
2.
Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it flips out with extra force.
Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
Ensure to unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the motherboard and the
components.
Unlocked retaining clip
DIMM notch
DIMM slot key
Locked
Summary of Contents for RS720-E8-RS24-ECP
