Asus RS700-E7/RS4 User Manual Download

Page: 180 / 196

7-24

Chapter 7: Driver installation

7.7

Intel

Rapid Storage Technology

enterprise 3.0 installation

This section provides the instructions on how to install the Intel

Rapid Storage

Technology enterprise 3.0 on the system.
You need to manually install the Intel

Rapid Storage Technology enterprise 3.0

utility on a Windows® operating system.
To install the Intel

Rapid Storage Technology enterprise 3.0 utility:

1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the

Intel

Rapid Storage Technology enterprise 3.0

to begin

installation.

4. When the

Welcome to the Setup Program

appears, click

Next

to start the

installation.

Summary of Contents for RS700-E7/RS4





































































































































































































Search results

Summary of Contents for RS700-E7/RS4

Reviews:

Related manuals for RS700-E7/RS4

Brands by name

Popular brands

Asus RS700-E7/RS4, User Manual

Search results

Summary of Contents for RS700-E7/RS4

Reviews:

Related manuals for RS700-E7/RS4

Brands by name

Popular brands