Asus RS700-E7/RS4, User Manual

Page: 91 / 196

ASUS RS700-E7/RS4 5-27
ID0 Completion Enable [Disabled]
If supported by hardware and set to ‘Enabled’, this permits setting the number of
ID-Based Ordering (ID0) bit (Attribute [2]) requests to be initiated.
Configuration options: [Disabled] [Enabled]
LTR Mechanism Enable [Disabled]
If supported by hardware and set to ‘Enabled’, this enables the Latency Tolerance
Reporting (LTR) Mechanism. Configuration options: [Disabled] [Enabled]
End-End TLP Prefix Blocking [Disabled]
If supported by hardware and set to ‘Enabled’, this function will bolck forwarding of
TLPs containing End-End TLP Prefixes.
Configuration options: [Disabled] [Enabled]
PCI Express GEN2 Link Register
Target Link Speed [Auto]
Configuration options: [Auto] [Force to 2.5 GT/s] [Force to 5.0 GT/s]
Clock Power Management [Disabled]
Configuration options: [Disabled] [Enabled]
Compliance SOS [Disabled]
Configuration options: [Disabled] [Enabled]
Hardware Autonomous Width [Enabled]
Configuration options: [Enabled] [Disabled]
Hardware Autonomous Speed [Enabled]
Configuration options: [Enabled] [Disabled]