Asus RS120-E4 PA4 User Manual Download Page 33

Page: 33 / 156

2-15

ASUS RS120-E5/PA2

2.5.3.

Replacing.the.optional.riser.card

The optional PCIX-E8-R10 riser card offers a better system expansion ability and

enables the system to install different add-in cards.
To replace the optional PCIX-E8-R10 riser card for RS120-E5:
1. Firmly hold the riser card bracket, then pull it up to detach it from the PCI

Express slot on the motherboard.

2. Unscrew the original riser card to remove it from the card bracket and set it

aside.

3. Align the screw holes on thePCIX-E8-R10 riser card with the ones on the

card bracket.

4. Fasten the riser card to the bracket with screws.

5. Follow the previous sections to install your expansion cards and reinstall the

card bracket back to the system.

Summary of Contents for RS120-E4 PA4





























































































































































Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands

Asus RS120-E4 PA4, User Manual

Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands