Asus RS120-E4 PA4 User Manual Download Page 121

Page: 121 / 156

ASUS RS120-E5/PA2

6-21

6.2.5.

Checking.the.drives.for.data.consistency

You can check and verify the accuracy of data redundancy in the selected logical

drive. The utility can automatically detect and/or detect and correct any differences

in data redundancy depending on the selected option in the

Objects

Adapter

menu.

The

Check.Consistency

command is available only for logical drives included

in a RAID 1 set.

Using.the.Check.Consistency

To check data consistency using the

Check.Consistency

command:

1. From the

Management.Menu

, select

Check.Consistency

, then press

<Enter>.

2. The screen displays the available RAID set(s) and prompts you to select the

logical drive to check. Press the <Spacebar> to select the logical drive from

the

Logical.Drive

selection, then press <F10>.

Summary of Contents for RS120-E4 PA4





























































































































































Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands

Asus RS120-E4 PA4, User Manual

Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands