6-28
Chapter 6: RAID configuration
6.3.1.
Creating.a.RAID.0.set.(Stripe)
To create a RAID 0 set:
1. From the utility main menu, select
1..Create.RAID.Volume
, then press
<Enter>. This screen appears.
2. Enter a name for the RAID 0 set, then press <Enter>.
3. Highlight
RAID.Level
, press the up/down arrow key to select
RAID.0.(Stripe)
,
then press <Enter>.
4. Highlight the
Disks
item, then press <Enter> to select the hard disk drives
you want to include in the RAID set. The
SELECT.DISKS
screen appears.
5. Use the up/down arrow key to highlight a drive, then press <Spacebar>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[
CREATE ARRAY MENU
]
[
DISK/VOLUME INFORMATION
]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
and cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[
SELECT DISKS
]
[
↑↓
]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
Port Drive Model
Serial # Size
Status
0
XXXXXX XXXXXX
XX.XGB Non-RAID Disk
1
XXXXXX XXXXXX
XX.XGB Non-RAID Disk
2
XXXXXX XXXXXX
XX.XGB Non-RAID Disk
3
XXXXXX XXXXXX
XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[
↑↓
]-Select [ESC]-Exit [ENTER]-Select Menu
