Asus RS120-E4 PA4 User Manual Download Page 155

Page: 155 / 156

ASUS RS120-E5/PA2

7-21

7.5

Management applications and utilities

installation

The support CD that came with the motherboard package contains the drivers,

management applications, and utilities that you can install to avail all motherboard

features.

The contents of the support CD are subject to change at any time without notice.

Visit the ASUS website (www.asus.com) for updates.

7.5.1.

Running.the.support.CD

Place the support CD to the optical drive. The CD automatically displays the

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE to run the CD.

7.5.2.

Drivers.menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system

versions.

Summary of Contents for RS120-E4 PA4





























































































































































Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands

Asus RS120-E4 PA4, User Manual

Search results

Summary of Contents for RS120-E4 PA4

Reviews:

Related manuals for RS120-E4 PA4

Brands by name

Popular brands