Asus ROG Swift PG27V, User Manual

Page: 28 / 32

3-8 Chapter 3: General Instructions
Accessories DP cable, HDMI cable, USB cable, power
adapter, power cord, Driver and Manual disc,
Quick start guide, warranty card, LED projection
cover and changeable films, Input/Output port
cover
Compliance and Standards CB, CE, CU, CCC, UL/cUL, FCC, RCM, BSMI,
VCCI, RoHS, WEEE, J-MOSS, ErP, PSE,
CEL Level 1, Windows 7 WHQL, Windows 8.1
WHQL, Windows 10 WHQL, KCC, E-Standby,
TUV-Flicker Free, TUV-Low Blue Light
*Specifications are subject to change without notice.
3.4 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON Press the power button to check if the •
monitor is in the ON mode.
Check if the power cord is properly
•
connected to the monitor and the power
outlet.
The power LED lights white and there is no
screen image
Check if the monitor and the computer are •
in the ON mode.
Make sure the signal cable is properly
•
connected the monitor and the computer.
Inspect the signal cable and make sure
•
none of the pins are bent.
Connect the computer with another
•
available monitor to check if the computer
is properly working.
Screen image is too light or dark Adjust the Contrast and Brightness •
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
Make sure the signal cable is properly •
connected to the monitor and the
computer.
Move electrical devices that may cause
•
electrical interference.
Screen image has color defects (white does
not look white)
Inspect the signal cable and make sure •
that none of the pins are bent.
Perform All Reset via OSD.
•
Adjust the R/G/B color settings or select •
the Color Temperature via OSD.