Asus ROG Swift PG27V User Manual Download

Page: 30 / 32

3-10

Chapter 3: General Instructions

DisplayPort input--Over clocking

Resolution Frequency

Refresh Rate

2560 x 1440

165Hz

Note:

Do not support interlace.

Over Clocking supported GPUs: NVIDIA Maxwell GPU Graphics Card like GTX 960, GTX970,

GTX980, GTX980 Ti and GTX Titan X or higher. For other GPUs, please contact the manufactures to

see if they are compatible.

The monitor is purposely supporting the NVIDIA G-SYNC technology and targeting NVIDIA graphics

solutions.

Please note that Over Clocking function/performance depends on the GPUs,

contents displayed, viewing distance/angle, refresh rate and user eyes

sensitivity. ASUS only provides this function. The performance or any side effect

after activation is not guaranteed. Side effect, such as decayed contrast ratio or

waterfall is not a product defect but trade off.

System Requirements for NVIDIA 3D vision

Microsoft

•

Windows

Vista 32/64-bit or Windows 7 32/64-bit or higher.

Intel® CoreTM2 Duo or AMD AthonTM X2 CPU or higher.

•

1GB of system memory (2GB is recommended)

•

100 MB free disk space.

•

Summary of Contents for ROG Swift PG27V

































Search results

Summary of Contents for ROG Swift PG27V

Reviews:

Related manuals for ROG Swift PG27V

Brands by name

Popular brands

Asus ROG Swift PG27V, User Manual

Search results

Summary of Contents for ROG Swift PG27V

Reviews:

Related manuals for ROG Swift PG27V

Brands by name

Popular brands