background image

2-14

Chapter 2: RAID configuration

Deleting an array

•  You cannot recover lost data if you delete an array. Make sure you back up 

important data before deleting an array.

•  If you delete an IM (RAID 1) volume, the data is preserved on the primary 

disk.

To delete an array:
1.  Follow steps 1~2 of the section 

Viewing volume properties

.

2.  From the screen, press <F2> to select <Activate Array>.

3.  Press <Y> to delete, or <N> to cancel.

Esc=Abort/Exit     ArrowKeys=Select Item      -/+  =Change [Item] 

                   Home/End =Select Item      Enter=Execute <Item> 

F2 =Menu

RAID Properties     Array:  IM  SCSI ID:   8    Size(MB):   70008 

SCSI  Device Identifier             Array  Hot   Status       Predict  Size

 

ID                                 Disk?  Spare              Failure  (MB) 

 8    FUJITSU MAT3073NC      0107  Yes    No    Primary      No       70008

 

 9    FUJITSU MAT3073NC      0107  Yes    No    Out of Sync  No       70008

 

10    FUJITSU MAT3073NC      0107  ---    Yes

   Ok           No       70008

LSI Logic MPT SCSI Setup Utility   Version    MPTBIOS-IME-5.10.03

<Next Array>  

<Delete Array>

  

<Add/Delete Hot Spare> 

 <Activate Array>

Summary of Contents for PXL-S30R









































Reviews: