Asus P8H77-V Manual Download Page 122

Page: 122 / 150

4-22

Chapter 4: Software support

Chapter 4

4.4.5

Introduction to Intel

2012 Desktop responsiveness

technologies

This document details the overview of the installation and configuration procedures of the

Intel

2012 Desktop responsiveness technologies.

Intel

2012 Desktop responsiveness technologies feature the three technologies:

Intel

Smart Response Technology

Intel

Rapid Start Technology

Intel

Smart Connect Technology

System Requirements for Intel

2012 Desktop responsiveness

technologies

In order for the system to run smoothly for the Intel

2012 Desktop responsiveness, you must

meet the following requirements:

1. CPU:

Intel

3rd/2nd generation Core Processor family

2. OS:

Windows

7 operating systems

3. SSD:

One dedicated SSD (Solid State Disk) to support Intel

Smart Response and

Intel

Rapid Start Technology is necessary.

Refer to the

SSD Capacity Requirements

table for the information of SSD size, partition

capacity, and system memory requirements.

4. HDD:

At least one HDD (Hard Disk Drive) for the system OS drive.

5. DRAM: To enable Intel

Rapid Start Technology, DRAM size smaller than 8GB is

required.

Ensure to enable the acceleration of Intel

Smart Response Technology

before

creating the partition for the Intel

Rapid Start Technology.

•
•
•

Summary of Contents for P8H77-V























































































































































Search results

Summary of Contents for P8H77-V

Reviews:

Asus P8H77-V, Manual, Page: 122 / 150

Search results

Summary of Contents for P8H77-V

Reviews: