Asus P6300 Series User Manual Download Page 53

Page: 53 / 108

The “DMA Channel” field allows you to configure the DMA Channel used by Fast Infrared port. The
following options are available:

• DMA 1
• DMA 3 (default)

This field is only available when the Infrared Port Mode field is set to FIR.

Parallel Port

This field allows you to configure the Notebook PC parallel port. The following options are available:

• PnP OS
• User
• Disabled
• Auto

The “Mode” field allows you to configure the Notebook PC parallel port transmission mode. The
following options are available:

• Output Only
• Bi-directional (default)
• ECP
• EPP

Changing the default address and IRQ settings for COM1, COM2 and the LPT
Port can cause conflicts with other system devices or installed peripherals.

Summary of Contents for P6300 Series













































































































Search results

Summary of Contents for P6300 Series

Reviews:

Related manuals for P6300 Series

Brands by name

Popular brands

Asus P6300 Series, User Manual

Search results

Summary of Contents for P6300 Series

Reviews:

Related manuals for P6300 Series

Brands by name

Popular brands