Asus P5W DH User Manual Download Page 64

Page: 64 / 212

Chapter 2: Hardware information

9. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that

supports either HD Audio or legacy AC’97 audio standard.

• We recommend that you connect a high-definition front panel audio module

to this connector to avail the motherboard high-definition audio capability.

• By default, this connector is set to HD Audio. If you want to connect a

legacy AC `97 front panel audio module to this connector, set the Front

Panel Support Type item in the BIOS Setup to [AC97]. See page 4-28 for

details.

8. Internal audio connector (4-pin CD)

This connector allows you to receive stereo audio input from a CD-ROM.

P5W DH DELUXE

P5W DH DELUXE Internal audio connector

Right A

udio Channel

Left A

udio Channel

Ground

P5W DH DELUXE

P5W DH DELUXE Analog front panel connector

AAFP

Legacy AC 97 audio

pin definition

SENSE2_RETUR

PORT1 L

PORT2 R

PORT2 L

SENSE1_RETUR

SENSE_SEND

PORT1 R

PRESENCE#

GND

MIC2_L

Line out_R

Line out_L

MIC2_R

AGND

HD Audio-compliant

pin definition

Summary of Contents for P5W DH





















































































































































































































Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands

Asus P5W DH, User Manual

Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands