Asus P5QL/EPU - Motherboard - ATX User Manual Download

Page: 55 / 64

ASUS P5QL/EPU

2-17

Parallel.Port.Mode.[ECP]

Allows you to select the Parallel Port mode.

Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]

ECP Mode DMA Channel [DMA3]

Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set

the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3]

Parallel Port IRQ [IRQ7]

Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]

2.5.4

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press

<Enter>

to display the configuration options.

The

USB.Devices.Enabled

item shows auto-detected values. If no USB device is

detected, the item shows

None

USB.Functions.[Enabled]

Allows you to enable or disable the USB functions.Configuration options: [Disabled] [Enabled]

USB.2.0.Controller.[Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

USB.2.0.Controller.Mode.[HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12

Mbps). This item appears only when you enable the USB 2.0 Controller item.

Configuration options: [FullSpeed ] [HiSpeed ]

Legacy.USB.Support.[Auto]

Allows you to enable or disable support for legacy USB devices. Setting to

[Auto]

allows

the system to detect the presence of USB devices at startup. If detected, the USB controller

legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

2.5.5.

PCI.PnP

The

PCI.PnP

menu items allow you to change the advanced settings for PCI/PnP devices.

Take caution when changing the settings of the PCI PnP menu items. Incorrect field values

can cause the system to malfunction.

Plug.And.Play.O/S.[No]

When set to

[No]

, BIOS configures all the devices in the system. When set to

[Yes]

and if

you install a Plug and Play operating system, the operating system configures the Plug and

Play devices not required for boot.Configuration options: [No] [Yes]

Summary of Contents for P5QL/EPU - Motherboard - ATX

































































Search results

Summary of Contents for P5QL/EPU - Motherboard - ATX

Reviews:

Related manuals for P5QL/EPU - Motherboard - ATX

Brands by name

Popular brands

Asus P5QL/EPU - Motherboard - ATX, User Manual

Search results

Summary of Contents for P5QL/EPU - Motherboard - ATX

Reviews:

Related manuals for P5QL/EPU - Motherboard - ATX

Brands by name

Popular brands