2-10
Chapter 2: BIOS setup
2.3.
Main.menu
When you enter the BIOS Setup program, the
Main
menu screen appears, giving you an
overview of the basic system information.
Refer to section
2.2.1.BIOS.menu.screen
for information on the menu screen items and
how to navigate through them.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Ai Tweaker Advanced Power Boot Tools Exit
System Time
[
14
:14:35]
System Date
[Wed 04/16/2008]
Legacy Diskette A
[1.44M, 3.5 in]
SATA 1
[Not Detected]
SATA 2
[Not Detected]
SATA 3
[Not Detected]
SATA 4
[Not Detected]
SATA 5
[Not Detected]
SATA 6
[Not Detected]
Storage Configuration
System Information
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system time.
2.3.1.
System.Time.[xx:xx:xx]
Allows you to set the system time.
2.3.2.
System.Date.[Day.xx/xx/xxxx]
Allows you to set the system date.
2.3.3.
Legacy.Diskette.A.[1.44M,.3.5.in.]
Sets the type of floppy drive installed. Configuration options: [Disabled]
[720K, 3.5 in.] [1.44M, 3.5 in.]
2.3.4.
SATA.1-6
While entering Setup, the BIOS automatically detects the presence of IDE devices.
There is a separate sub-menu for each IDE device. Select a device item then
press <Enter> to display the IDE device information.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These
values are not user-configurable. These items show
N/A
if no Serial ATA device is installed in
the system.
Type.[Auto]
Selects the type of IDE drive. Setting to
[Auto]
allows automatic selection of the appropriate
IDE device type. Select
[CDROM]
if you are specifically configuring a CD-ROM drive. Select
[ARMD]
(ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
Summary of Contents for P5QL/EPU - Motherboard - ATX
Page 1: ...Motherboard P5QL EPU ...
Page 38: ...1 28 Chapter 1 Product introduction ...
Page 64: ...2 26 Chapter 2 BIOS setup ...
