2-12
ASUS P5KPL-AM IN/GB
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
Disable/Enable PME to generate a wake event. Configuration options: [Disabled] [Enabled]
Power On By PCIE Devices [Disabled]
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This feature requires
an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
2.5.4
APM Configuration
Restore on AC Power Loss [Power Off]
When this item is set to
[Power Off]
, the system goes into off state after an AC power loss.
When this item is set to
[Power On]
, the system goes on after an AC power loss. When this
item is set to
[Last State]
, the system goes into either off or on state, whatever the system
state was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Power On By RTC Alarm [Disabled]
Disable/Enable RTC to generate a wake event. Configuration options: [Disabled] [Enabled]
2.5.5
Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU temperatures.
Select Ignored if you do not wish to display the detected temperatures.
CPU Fan Speed (RPM) [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU fan speed in
rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows
N/A
. Select
[Ignored]
if you do not want to display the detected speed.
CPU Q-Fan Function [Disabled]
Allows you to enable or disable the Q-Fan function. Configuration options: [Disabled]
[Enabled]
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators.
