Chapter 2: BIOS information
2-9
CPU TM function [Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM2) function, a CPU overheating
protection function. When this item is set to [Enabled], the CPU core frequency and voltage is
reduced when the CPU overheats. Configuration options: [Enabled] [Disabled]
Execute Disable Bit [Enabled]
Allows you to Enable/disable Execute Disable Function.
Configuration options: [Disabled] [Enabled]
Intel
®
SpeedStep
®
Technology [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When this item is set to
[Enabled]
, you can adjust the system power settings in the operating system to use the EIST
feature. Set this item to
[Disabled]
if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
2.4.4
Chipset
The
Chipset
menu allows you to change the advanced chipset settings. Select an item then
press
<Enter>
to display the sub-menu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PCI/IGD]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the Interanal graphics device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
Video Function Configuration
DVMT Mode Select [DVMT Mode]
Allows you to select the DVMT Mode. Configuration options: [Fixed Mode]
[DVMT Mode]
DVMT/FIXED Memory [256MB]
Allows you to select the amount of the DVMT/FIXED Memory. Configuration options:
[128MB] [256MB] [Maximum DVMT]
