Asus P1-P5945GCX User Manual Download

Page: 51 / 90

4-7

ASUS P1/P2-P5945GCX

Never connect a

1394 cable

to the USB connectors. Doing so will damage the

motherboard!

4. USB connector (5-1 pin USB7)

This connector is for USB 2.0 ports. Connect the USB/GAME module cable

to any of these connectors, then install the module to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

The USB module is purchased separately.

3. CPU Fan connector (3-pin CPU_FAN)

The fan

connector support cooling fans of 350 mA~740 mA (8.88 W max.) or a

total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cable to the fan

connector on the motherboard, making sure that the black wire of each cable

matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air

flow inside the system may damage the motherboard components. These are

not jumpers! Do not place jumper caps on the fan connectors!

CPU FAN Connector

CPU_FAN

GND

+12V

Tachometer

USB7 Connector

USB7

GND

USB LP7+

USB LP7-

USBPW78

Summary of Contents for P1-P5945GCX



























































































Search results

Summary of Contents for P1-P5945GCX

Reviews:

Related manuals for P1-P5945GCX

Brands by name

Popular brands

Asus P1-P5945GCX, User Manual

Search results

Summary of Contents for P1-P5945GCX

Reviews:

Related manuals for P1-P5945GCX

Brands by name

Popular brands