2-14
Chapter 2: Basic installation
2.8
Installing an optical drive and reinstalling
the storage drive assembly
Refer to the instructions in this section if you wish to install a new optical drive.
Follow these steps to install an optical drive:
1. Turn the storage drive assembly upside down with the 3.5-inch bay on top of
the 5.25-inch bay.
2. Insert the optical drive upside down to the 5.25-inch bay, then secure it with
two screws on both sides.
3. Turn the storage drive assembly, insert the hard disk drive upside down to the 3.5-
inch bay, then secure it with two screws on both sides.
2
3
