Asus P1-P5945GCX User Manual Download

Page: 22 / 90

2-6

Chapter 2: Basic installation

2.5.4

Removing and Installing the CPU fan and heatsink

assembly

The system package includes a proprietary CPU fan and heatsink assembly to

ensure optimum thermal condition and performance.

DO NOT replace the proprietary CPU fan and heatsink with other models!

Refer to the figure below for the location of the CPU fan connector on the

motherboard.

CPU FAN Connector

CPU_FAN

GND

+12V

Tachometer

3. Lift the CPU fan and heatsink

assembly, then set aside.

1. Disconnect the CPU fan cable.

2. Loosen the CPU fan and heatsink

assembly screws with a screw

driver.

Locate the CPU fan and heatsink assembly and secure it with the four

screws, then reconnect the CPU fan cable to the CPU fan connector on the

motherboard.

To reinstall the CPU fan and heatsink assembly:

To remove the CPU fan and heatsink assembly:

Do not forget to connect the CPU fan connector! Hardware monitoring errors

can occur if you fail to plug this connector.

Summary of Contents for P1-P5945GCX



























































































Search results

Summary of Contents for P1-P5945GCX

Reviews:

Related manuals for P1-P5945GCX

Brands by name

Popular brands

Asus P1-P5945GCX, User Manual

Search results

Summary of Contents for P1-P5945GCX

Reviews:

Related manuals for P1-P5945GCX

Brands by name

Popular brands