Asus M1A User Manual Download Page 51 | Manualshive

Page: 51 / 98

background image

51

4. Using the Notebook PC

IR Wireless Communication

The Notebook PC is equipped with a conveniently located Infrared (IR) Communication Port (see

2.

Knowing the Parts

for location). The IR port comes with IrDA (Infrared Data Association) Serial

Infrared Data Link Version 1.1 compliance, that allows you to perform point-to-point wireless commu-
nications. You can use a SIR/FIR-specified application to transmit or receive data files with other
systems equipped with an infrared port. You must set these modes in the BIOS before you start to install
the IR driver and file-transferring applications. FIR (Fast Infrared) supports up to 4Mbps and SIR
(Serial Infrared) supports up to 115.2Kbps. See the Drivers and Utilities Support CD User’s Manual for
detailed setup instructions.

Guidelines for using IR communication

Follow the guidelines listed below when using the Infrared (IR) Communication:

• Make sure the IR Mode in the BIOS Setup is properly set to the mode you would like to use.
• The angle between two Infrared communication ports should not exceed ±15˚.
• The distance between the Notebook PC’s IR and target device IR should not exceed 40 inches (1 m).
• Do not move either the Notebook PC or the other device during transmission of data.
• An error may occur if IR transmission is conducted with high levels of noise or vibration.
• Avoid direct sunlight, flashing incandescent light, florescent light, and other infrared devices such as

remote controls close to the infrared port.

Enabling Infrared

Infrared communication must be enabled in MS Windows 98. Right click on the infrared icon on the
Windows taskbar and select “Enable infrared communication.” When infrared communication is en-
abled, moving the cursor over the icon will give its status. MS Windows ME Infrared connection is
called “Wireless Link” and should be enabled by default. Look for the icon in the Control Panel.

Information is shown when the cursor

is passed over this speaker icon

A right-click on this infrared

icon gives a menu

Windows ME
Wireless Properties

Windows ME
Wireless Link icon
in Control Panel

Windows 98
Taskbar with Infrared icon

«
...
49
50
51
52
53
...
»

Summary of Contents for M1A



































































































Reviews:

No comments

Related manuals for M1A

TravelMate 2000

Brand: Acer Pages: 82

Brand: Gateway Pages: 164

TravelMate 3000

Brand: Acer Pages: 78

Brand: Gateway Pages: 12

Brand: Itronix Pages: 101

Aspire 5332 Series

Brand: Acer Pages: 11

ASPIRE ASPIRE X1700

Brand: Acer Pages: 99

Brand: Acer Pages: 13

Brand: LEXIBOOK Pages: 11

Brand: Lenovo Pages: 12

100e Chromebook Gen 3

Brand: Lenovo Pages: 39

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 1

100S Chromebook-11IBY

Brand: Lenovo Pages: 56

100e Chromebook 2nd Gen

Brand: Lenovo Pages: 7

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands